Ohaus Valor 7000 Series COMPACT FOOD SCALES Manual - Manual (Page 18)

EN-16
Valor™ 7000
Series
4.4 Readout Menu
Enter this menu to set user preferences. Default settings are bold.
Reset
[reset]
Reset the Read menu to factory defaults.
NO = not reset
YES = reset
Stable Range
[Stable]
Set the amount the reading can vary while the stability symbol remains on.
0.5d = 0.5 scale division
1d = 1 scale division
2d = 2 scale division
5d = 5 scale division
Filter
[FILtEr]
Set the amount of signal filtering.
LOW = less stability, faster stabilization time
MED = normal stability, stabilization time
HI = greater stability, slower stabilization time
AZT
[AZt]
Set the automatic zero tracking functionality.
OFF = disabled
0.5d = the display will maintain zero until a change of 0.5 divisions per second has
been exceeded.
1d = the display will maintain zero until a change of 1 divisions per second has been
exceeded.
3d = the display will maintain zero until a change of 3 divisions per second has been
exceeded.
Light
[LIGHt]
Sets backlight functionality.
OFF = always off
ON = always on
AUTO = turns on when a button is pressed or the displayed weight changes.
Auto off
[A.OFF]
Set the automatic shut off functionality.
OFF = disabled
1 = powers off after 1 minute of no activity
5 = powers off after 5 minute of no activity
10 = powers off after 10 minute of no activity
Reset:
no
, yes
Stable Range: 0.5, 1, 2, 5
Filter: low, medium, high
Automatic-Zero Tracking: off, 0.5, 1, 3
Light: off, on, auto
Auto Off:
off
, 1, 5, 10
End Readout: Exit menu