Series, Maintenance, Err 8.1 – Ohaus Valor 7000 Series COMPACT FOOD SCALES Manual User Manual

Page 30: Err 8.2, Err 8.3, Err 8.4, Err 8.5, Err 8.6, Err 9.5, Cal e

Advertising
background image

EN-28

Valor™ 7000

Series

6. MAINTENANCE

6.1 Cleaning

The housing may be cleaned with a cloth dampened with a mild detergent if necessary. Do not

use solvents, chemicals, alcohol, ammonia or abrasives to clean the housing or control panel.

6.2 Troubleshooting

Table 6-1 lists common problems and possible causes and remedies.

If the problem persists, contact OHAUS or your authorized dealer.

TABLE 6-1

Symptom

Possible Cause

Remedy

Cannot turn on

No power to scale

Verify connections and voltage

Poor accuracy

Improper calibration

Unstable environment

Perform calibration

Move scale to suitable location

Cannot calibrate

LFT locked

See chapter 5 for more information

Cannot access mode Mode not enabled

Enter menu and enable mode

Cannot access unit

Unit not enabled

Enter menu and enable unit

Battery icon flashing

Low Battery error

Connect the scale to AC power and

charge the battery

Err 8.1

Power On Error

Weight reading exceeds Power On Zero

limit

Err 8.2

Power On Error

Weight reading below Power On Zero

limit

Err 8.3

Over Range Error

Weight reading exceeds Overload limit

Err 8.4

Under Range Error

Weight reading below Underload limit

Err 8.5

Tare out of range

Adjust tare value to be within range

Err 8.6

Display overflow

Weight exceeds 6 digits.

Err 9.5

Calibration data error

Calibration data not present

-------

Busy

Displayed during tare setting, zero

setting, printing

--NO--

Action not allowed

Function not executed

CAL E

Calibration error

Unstable environment

Incorrect calibration

weight

Calibration value outside allowed limits

Move the scale to suitable location

Use correct calibration weight

Lo.rEF

Low reference weight

warning

Increase reference weight

rEF.Err

Unacceptable reference

weight

Reference weight too small. Weight on

the pan is too small to define a valid

reference weight. Increase reference

weight

NO.ACC

Gross and net weights

cannot be accumulated

together

Only accumulate gross or net weights

(only works in LFT)

Battery fails to charge

fully

Battery is defective

Have battery replaced by Ohaus

authorized service dealer.


Advertising