Ohaus E1RW60 Explorer Balances - Manual (Page 55)

1
OVERVIEW OF CONTROLS
Mode
Units
Setup Print Enter
1
3
4
2
5
6
8
9
10
7
Stable Mode Units Setup
Custom
Use keys to change,
B/G
NET P T
Center
of Zero
press - O/T -
% PG N
lb ozcti
mg
press Enter
kgdwt
Change
>O/T<
>O/T<
OHAUS ®
Stable
g
Print
Setup
Units
Mode
Enter
12
11
No. Designation Function
1 I Power on off button.
2 Mode button Selects standard weighing, percent, parts counting and animal weighing modes.
3 Units button Selects weighing units.
4 Setup button Selects various submenus: calibration, date, time, readout, GLP data, GLP set,
print, RS232, LFT, function, units, global, custom.
5 >O/T< button When pressed, performs tare function and a center of zero function.
6 button When pressed, travels up through submenus.
7 button When pressed, travels down through submenus.
8 button When pressed, travels to the left through menus.
9 button When pressed, travels to the right through menus.
10 Enter/Print button When in menus, selects item on display, otherwise prints data.
11 Leveling feet Used to level the balance.
12 Leveling indicator Indicates leveling position of the balance.