Ohaus E1RW60 Explorer Balances - Manual (Page 64)

10
Mode
Units
Setup Print Enter
Mode
Units
Setup Print Enter
3.3.2 Calibration Message
On Explorer balances equipped with the InCal TM feature, a screen prompt of CAL NOW appears when the
balance requires calibration. This display can be turned off if it is desired not to have the balance indicate that
calibration is required. Turning the display off has no effect on the basic balance operation.
Stable
g
Procedure
• Press the Setup button, CAL is displayed.
• Press Enter button, CAL TYPE is displayed.
• Press button, CAL MSG is displayed.
• Press Enter button, CAL MSG ON is displayed.
• Press or button and select either ON or
OFF. When OFF is selected, the CAL NOW message
will not appear in the display.
NOTE: When the balance is in a legal for trade mode,
this option is locked ON. In this condition, the balance
will display the CAL NOW message when recalibration
is required.
• Press Enter button, SAVED is momentarily
displayed, then the display indicates CAL ADJ.
NOTE: At this point you may continue with the calibra-
tion adjust procedure on the next page or exit.
The calibration adjust procedure is only used when it is
desired to calibrate the internal calibration mass to a
known external Class I mass if a difference exits.
• Press button until EXIT is displayed.
• Press Enter button, display returns to WEIGH
mode.
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change