Ohaus E1RW60 Explorer Balances - Manual (Page 74)

20
Mode
Units
Setup Print Enter
Procedure
• Press the Mode button.
• Press or button until ANIMAL is displayed.
• Press Enter button to continue, LEVEL is displayed.
• Press or button to change animal weighing
level, 0, 1, 2 or 3. 0 level represents an inactive
subject, 3 is used for a very active subject.
• Press Enter button to continue, AUTO is displayed.
• Press or button to select AUTO ON or OFF.
• Press Enter button to continue.
When the AUTO function is set ON, different subjects
can be weighed one after another without pressing any
buttons. When the balance displays READY, simply
place subject on pan.
Starting Animal Cycle
• Place animal container if used on pan.
• Press # to tare the container.
• Place subject on pan.
• The animal cycle will automatically start if AUTO was
set to ON.
• Press Enter button to start animal cycle if AUTO was
set to OFF.
During Animal Cycle
• Display shows countdown to AW0.
Completed Animal Cycle
• Balance displays weight until subject is removed
from the pan.
Mode
Use keys to change, press Enter
Change
Mode
Use keys to change, press Enter
Change
Mode
Use keys to change, press Enter
Change
Stable
g
3.7 Animal Weighing
Animal Weighing is enabled only when Animal is turned ON in the Mode submenu under Setup.
press Enter