Calibration glp printout – Ohaus E1RW60 Explorer Balances User Manual
Page 70
16
3.3.8 Calibration GLP Printout
If any option in the GLP Set Menu is turned On, GLP automatically prints data after calibration is completed.
- - - - - SPAN CAL - - - - - -
12/01/97
1:00:00 PM
Bal Id 1234
Cal:
8000.00 g
Old:
8000.00 g
Dif:
0.00 g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
- - - - - INCAL - - - - - -
12/01/97
1:00:00 PM
Bal Id 1234
Cal:
8000.00 g
Old:
8000.00 g
Dif:
0.00 g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
InCAL
TM
Calibration Printout
When performing InCAL
TM
calibration with all GLP options
turned on, a printout is automatically made after the
calibration is completed.
- - - - - LIN CAL - - - - - -
12/01/97
1:00:00 PM
Bal Id 1234
Cal:
8000.00 g
Old:
7999.08 g
Dif:
0.02 g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
- - - - - CAL TEST - - - - - -
12/01/97
1:00:00 PM
Bal Id 1234
Cal:
8000.00 g
Act:
8000.02 g
Dif:
0.02 g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
Span Calibration Printout
When performing Span calibration with all GLP options
turned on, a printout is automatically made after the
calibration is completed.
Linearity Calibration Printout
When performing a Linearity calibration with all GLP
options turned on, a printout is automatically made after
the calibration is completed.
Calibration Test Printout
When performing a Calibration Test with all GLP options
turned on, a printout is automatically made after the cali-
bration is completed.