Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) PowerPack & Stinger w_EconoMind '03-05 For use with PowerPDA User Manual
Page 27
Advertising
6.
Locate and remove the screw
in the center dash panel above the
hook as shown in Figure 33.
7.
Remove the center dash panel
by gently pulling and unclipping it
as needed. (See Figure 34).
8.
Guide the RJ12 cable through the
clearance between the removed
panel and the center dash as shown
in Figure 35.
Figure 33
Figure 34
Figure 35
96812 v.7.0
27
Advertising