Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Power Systems- Stinger system '03-04 User Manual
Page 13
48.
Locate the solid red wire in the
wire loom entering c130 connector.
This is the same connector removed
in Step
1
. Install a T-tap on the red
wire and plug the blue Tcc wire into
it. See Figure
16
.
49.
FOR ALL 2003 VEHICLES
ONLY: Locate the green wire with
black tracer in the wire loom entering
c130 connector. This is the same
connector removed in Step
1
.
Install a T-tap on this wire. Plug the
red OttoMind wire into this T-tap.
Skip to Step
53
.
50.
FOR 2004 AUTOMATIC
TRANSMISSION VEHICLES ONLY:
Plug the TCC extension into the blue
Tcc wire. Using the wire harness on
the two (2) connectors next to the
main brake cylinder as a guide (see
Figure
17
), route the blue and gray
Tcc wires toward the transmission
solenoid assembly that is sitting
on the transmission. It is located
underneath the drivers side of the
vehicle. See Figure
18A
. Secure the
wire using cable ties along the way.
Figure 15
Figure 16
9 6 7 6 7 v . 3 . 0
| 13