Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Power Systems- Stinger system '03-04 - Manual (Page 14)

51.
Find the yellow wire with
orange stripe on the solenoid
assembly. Apply a generous amount
of the supplied dialectric grease into a
T-tap and install it on this wire. Insert
the blue Tcc wire into this T-tap.
Find the yellow wire with light blue
stripe. Apply a generous amount of
the supplied dialectric grease into a
T-tap and install it on this wire. Insert
the gray Tcc wire into this T-tap. See
Figure
18B
52.
FOR ALL 2004 VEHICLES
ONLY: Locate the two (2) electrical
connectors next to the main brake
cylinder. Find the pink wire with gray
stripe on the connector closest to the
brake cylinder. Install a T-tap on this
wire. Insert the 7” red extension wire
into the red OttoMind wire. Plug this
red wire into the T-tap. See Figure
19 .
Figure 18A
Figure 17
14 |
9 6 7 6 7 v . 3 . 0