Banks Power Chevy_GMC Trucks: Duramax LMM (Diesel ’07 - 10 6.6L) Power Systems- PowerPack & Stinger w_EconoMind ('07-09) LMM (PDA) Compatible w_Optional PowerPDA - Manual (Page 37)

96507 v.4.0
37
WARNING: The charging cable on
the docking station is designed
to supply a constant low-voltage
power source (+5vdc) to the
Banks PowerPDA and is “live”
as long as the system’s OBD II
Interface Cable is completely
installed and the RJ12 connector
is plugged into the docking
station. Although this charging
cable is short and it’s circuitry
is fuse protected, the user is
expected to take appropriate
measures to prevent small
children and/or pets from contact
with any part of this system.
10.
Route all wiring away from any
pedals or other moving components.
Using the cable ties supplied, secure
the wiring under the dash.
11.
Double check everything to make
sure it is securely fastened and it
is not near any hot or moving parts
before starting engine.
12.
Set up the Banks PowerPDA
according to it’s instructions.
WARNING: The PDA may be
susceptible to damage as a
result of extended exposure
to sunlight, heat or extreme
cold. It is highly recommended
that the PDA be removed from
it’s mounting location if the
vehicle will be subjected to high
concentrations of sunlight, heat
or cold for an extended period
of time. Gale Banks Engineering
is not responsible for damage to
PDA’s resulting from exposure
conditions.
-END, SEcTION 5-
Figure 28