Economind tuner icon – Banks Power Chevy_GMC Trucks: Duramax LMM (Diesel ’07 - 10 6.6L) Power Systems- PowerPack & Stinger w_EconoMind ('07-09) LMM (PDA) Compatible w_Optional PowerPDA User Manual
Page 55
96507 v.4.0
55
EconoMind troubleshooting using
the Banks PowerPDA.
Check the Banks PowerPDA’s
Status Indicator for the “OK” icon.
Any EconoMind Tuner fault will be
indicated by the “Banks Engine” icon
(see Figure 48) and it’s cause can
be investigated by going to the ‘Self
Diagnostics’ screen and scrolling
through the list of logged Tuner
events.
1.
Press the center button on the 5-
way navigator (Figure 49) to take you
to the System Menu screen.
2.
Touch the button labeled ‘More>’
to move to the second screen of the
System Menu
3.
Next, touch the ‘Self Diagnostics’
button. (See Figure 50)
4.
The ‘Self Diagnostics’ screen
displays a log of diagnostic events
related to the EconoMind Tuner (See
Figure 51). The ‘Logged Events’ list
takes a moment to update each time
this screen is opened (as indicated
by a slight flickering of the list). Once
the list is updated, the most current
event will appear at the top of the list.
Each event has an associated time
stamp and description, which will be
displayed below the list when that
event is highlighted. Each key cycle
of the vehicle produces a minimum of
two logged events.
5.
Touch the ‘Down’ or ‘Up’
buttons to scroll through the list of
recorded events. Table 1 lists the
available diagnostic codes and the
recommended course of action for
each.
6.
Touch the center button on the 5-
way navigator (or the ‘Back’ button) to
return to the System-Monitor screen.
Section 12
ECONOMIND TUNER TROUBLESHOOTING
Figure 50
Figure 49
(UP)
(DOWN)
5-WAY
NAVIGATOR
Figure 51
ECONOMIND TUNER ICON
Figure 48