Editing variables – Grain Systems PNEG-1755 User Manual
Page 16
Advertising
![background image](/manuals/277523/16/background.png)
4. PLC WatchDog Operation
16
PNEG-1755 PLC WatchDog
Editing Variables
All of the previous listed variables can be changed by the following instructions; we will use Grain Temp
as an example.
Navigate to the GSI PLC WatchDog web page. -
Select “View Data”. -
Select “PLC WatchDog”. -
Select “Edit” next to the Grain Temp variable.
In the box labeled “New Value”, enter your new setpoint.
Figure 4F
Click “OK”.
You will be re-directed back to the “PLC WatchDog”
.
Verify your new Grain Temp setpoint is listed as the “Value”.
Advertising