Grain Systems PNEG-1755 - Manual (Page 22)

4. PLC WatchDog Operation
22 PNEG-1755 PLC WatchDog
Change Password Button
Password status must be active to enable this function.
When changing a password, the user must first enter the desired change in the “New Password” field on
the “View Data - Password” web page. The user must also re-type the new password in the “Re-Enter New
Password” field. These values must match in order to complete the password change. After completing
the variable edit, the user needs to return to the “Remote View” web page,
Figure 4J on Page 19 .
Figure 4N
NOTE: For additional information on editing variables, please review the “View Data - Editing Variables”
section on Page 16 of this manual.
Pressing the “Change Password” button will then change the password to the new password entered.
Upon a successful attempt, the status indicator will notify the user that the password has been “Accepted”.
Please record and place the new password information in a safe place.