Grain Systems PNEG-1755 - Manual (Page 9)

PNEG-1755 PLC WatchDog 9
3. Installation
PLC WatchDog Connection (Part #: GT4-5073)
This requires an active internet connection be present at the dryer via Ethernet (RJ-45 connection). It is
recommended that either an Internet Service Provider (ISP) technician or someone versed in networking
be present during installation. While GSI’s Technical Support group can offer suggestions, GSI is not
responsible for the required connection.
Package Contents
The contents of this package are pictured in Figure 3A . Please refer to Figure 3A during installation.
Package contains:
1. Red Lion Controller
2. 24 VDC Power Supply
3. CF memory card
4. Cable #CBLAB001
Figure 3A
1
2
3
4