Grain Systems PNEG-1755 - Manual (Page 24)

4. PLC WatchDog Operation
24 PNEG-1755 PLC WatchDog
Dryer Display Button
Main Display
Password status must be active to enable this function.
Pressing the “Dryer Display” button will take the user to the screen displayed in Figure 4P which provides
a continuous visual feedback on the current dryer status.
Figure 4P
Viewing Temperature/Moisture History
Press the left and right arrows below the Temperature/Moisture History Chart to move backward and
forward through the graph. Press the “IN” and “OUT” buttons to change the viewing width of the chart.
This width of the chart can show a time span as short as 30 seconds or as long as 48 hours.
On this screen there are several buttons that enable the user to use some remote control options for
the dryer.
Stop Button
Pressing the red “STOP” button will shutdown the dryer.
Auto/Manual Button
Pressing the “Auto/Manual” button allows the operator to change the control of the dryer from automatic
to manual.
Email On/Off Button
Pressing the “Email On/Off” button allows the user to turn the messaging capabilities of the
PLC WatchDog program ON or OFF.