Grain Systems Tanks PNEG-256 - Manual (Page 46)

46 PNEG-256 6', 7' & 9' Bulk Feed Tanks
9. LEGS AND LEG BRACES
Leg Size Chart
One-Ring Leg 140-1/2'' (3569 mm)
Figure 9F Leg Adjustment (7' (1-4 ring) 67° & 9' (1-5 ring) 60° only)
Note: 9' 5 - Ring tanks must utilize two ring coverage legs if raising 8" (203.2 mm).
Failure to follow instructions may cause damage or failure of the equipment.
Depending on the size of the Bulk Feed Tank you are assembling, the leg will cover either the
bottom ring or 1-3/4 rings (56"). Refer to this chart to find the correct number of rings your legs
will cover. Put all legs on, but don't tighten bolts until all braces are in place. Be sure to put
leg braces on properly. (Refer to
Page 47 to Page 51 )
Tank Size Hopper Number of Rings Length Leg Coverage
6' Diameter 60 Degree 1-3 Rings 106-3/8'' 1-Ring
6' Diameter 60 Degree 4-Rings 106-3/8'' 1-Ring
7' Diameter 67 Degree 1-4 Rings 140-1/2'' 1-Ring
7' Diameter 67 Degree 5-6 Rings 164-1/2'' 1-3/4 Ring (56'')
7' Diameter 45 Degree 1-4 Rings 94-1/8'' 1-Ring
7' Diameter 45 Degree 5-6 Rings 120-3/4'' 1-3/4 Rings (56'')
9' Diameter 60 Degree 1-5 Rings 140-1/2'' 1-Ring
9' Diameter 60 Degree 6 Rings 164-1/2'' 1-3/4 Ring (56'')
9' Diameter 45 Degree 1-5 Rings 106-1/8'' 1-Ring
9' Diameter 45 Degree 6 Rings 132-3/4'' 1-3/4 Rings (56'')
13 Holes
10 Holes
CAUTION