Grain Systems Tanks PNEG-256 - Manual (Page 51)

PNEG-256 6', 7' & 9' Bulk Feed Tanks 51
9. LEGS AND LEG BRACES
Hopper braces are to be spaced equally around tank. Hopper braces are required on all hopper
tanks. Refer to the chart below for the quantities required.
Note: Hopper braces attach between the legs and the collar/hopper horizontal seam.
Never bolt the braces directly to the hopper seam above the collar. Use 16" braces
with 16" collar and 22" braces with 22" collars.
Tank
Brace Part Number
Qty
Brace Part Number
Qty
(16'' Hopper) (22'' Hopper)
6' 60° BLK-12146 4 BLK-12147 4
7' 67° BLK-12107 4 BLK-12108 4
7' 45° BLK-12105 4 BLK-12106 4
9' 60° BLK-12109 6 BLK-12110 6
9' 45° BLK-12111 6 BLK-12112 6