Grain Systems Unload Augers PNEG-1555 User Manual
Page 20
Advertising
20 PNEG-1555 8" Commercial Vertical Drive Unit - Dual Drive
4. Installation
H. With the cotter pins in the pivot rod, bend one tab of the cotter pin back so that it touches the
pivot rod, and bend the other tab of the cotter pin away from the first tab.
Figure 4P
I. Thread one (1) of the motor mount adjustment nuts and one (1) the motor mount adjustment
washers approximately 3/4 of the way down the motor mount adjuster threaded rod.
J. Once the nut and washer are in place, slip the motor plate over the adjuster and align its pivot
holes with the top pivot holes on the motor mount plate.
Figure 4Q
Advertising