Gas train (continued) – Grain Systems PNEG-1820 User Manual
Page 26
Advertising
10. Initial Start-Up
26
PNEG-1820 CE Compliant Top Dry Series 2000 Autoflow
Gas Train (Continued)
6. Set burner low-fire pressure.
•
Set plenum temperature to approx. 10°C above ambient.
•
Light burners.
•
On low fire, adjust high-low valve minimum setting to give pressure as per fuel specifications
.
7. Read pressure at burner gauge.
8. Run burners and check burner modulates correctly.
9. Check gas pressure remains stable fill out gas train commissioning check sheet.
Advertising