Grain Systems PNEG-1820 - Manual (Page 5)

1. Safety
PNEG-1820 CE Compliant Top Dry Series 2000 Autoflow 5
Fan/Heater Installation and Operating Instructions
Thank you for choosing a Top Dry Series 2000 Autoflow.
This manual describes the operation of CE Compliant Top Dry Series 2000 single fan, multi-fan heater
control units.
Our principal concern is your safety. This manual is written to help you understand safe operating
procedures for you and your co-workers.
As owner and/or operator, it is your responsibility to know that requirements, hazards and precautions
exist and to inform all personnel associated with the equipment or who are in the area.
Do not alter the equipment. Alterations may produce a very dangerous situation, where serious injury or
death may occur.
CE Compliance
This dryer has been designed to comply with EU Directives. Compliance depends upon the dryer being
constructed, installed and operated in accordance with GSI instructions.
General Safety
Before operating your Top Dry, please read and understand this manual.
Keep the manual available for operators and maintenance technicians.
Make sure all operators are aware of potential hazards, risks and safe operating procedures.
Never enter the dryer when it is operating.
The Top Dry is designed for drying agricultural corn, seeds and grain only.
To reduce the risk of fire, keep the dryer clean, paying special attention to the area around the fan
and heater.
Use only genuine GSI parts.
Never bypass any safety device or interlock.
Electrical Safety
Electrical connections and maintenance must be carried out in accordance with Local Codes and
Directives by qualified engineers only.
The dryer must be fitted with a suitable, lockable electrical shut off device (isolator).
Flammable Fuels
Fuel supply and connections must be made in accordance with Local Codes and Directives by qualified
gas fitters.
The fuel supply must include over pressure protection and a lockable manual isolator valve.
Check the fuel type is correct or the dryer and supply pressures meet the dryer requirements
Safety Guards
Safety guards must be fitted securely at all times when operating the dryer.
If a guard becomes damaged lease fit a genuine replacement before using the dryer.