Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1366 - Manual (Page 18)

18 PNEG-1366 12" and 16" Series II Sweep Quick Disconnect Control Box Kit
5. Assembly
Docking Station Mount
Securely mount the docking station outside of the bin near the bin door. Figure 5A shows the hole pattern
and diameter. The docking station must be close enough to the bin door to plug in the 10' long foot switch
cord. The operator must be outside of the bin and be able to depress the foot switch while visually
monitoring the sweep through the bin door.
Figure 5A Docking Station
The control panel must be mounted outside the bin near the door. The foot switch
has to be plugged into the control panel and depressed before the sweep is
operational. It has a 10' cord so the sweep can only be monitored from outside
the bin.