Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1366 - Manual (Page 5)

PNEG-1366 12" and 16" Series II Sweep Quick Disconnect Control Box Kit 5
1. Product Overview
The Quick Disconnect Control Box was designed to work 12" and 16" GSI Series II Sweeps.This Quick
Disconnect Control Box modular design will allow you to move the control box to each sweep location,
therefore only one control box is needed to control all of the same size sweeps. Each sweep location
will require a docking station for the control box base to slide into. The control box base is supplied with
four (4) handles for manual lifting. These handles can be installed in any of the holes located on the
outside edges of the base back plate. The base back plate also has two (2) chain lift holes for
mechanical hoisting.
Figure 1A
Never attempt to lift the control box by yourself. Always use two (2) or more
persons with proper lifting equipment.