Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1366 User Manual
Page 21
Advertising
5. Assembly
PNEG-1366 12" and 16" Series II Sweep Quick Disconnect Control Box Kit
21
Based on where the outlet for the drop cord is installed on the panel, all three (3) mounting positions may
not be possible.
Figure 5D
A sample installation configuration is shown in
for the auger drive power outlet, tractor drive
power outlet, overload for motor control outlet and the drop cord outlet.
shows preliminary
dimensions for all the necessary holes that need to be cut into the panel. Actual sizes may vary.
Figure 5E
Advertising