Chapter 3: dryer supports – Grain Systems PNEG-1891 User Manual
Page 21
Advertising
1. Position the leg stands (E) behind the hitch frame, and align them with the holes in the rear hitch
cross channel (D).
2. Fasten the legs to the channel using two bolts (B), four washers (C), and two nuts (A) per each leg.
Figure 3-7 Installing leg stands to the hitch assembly
Callout
Part number
Description
A
S-8506
1/2 in. - 13 zinc flange nut
B
S-8856
1/2 in. - 13 X 1 3/4 in. zinc grade 5 flange bolt
C
S-2121
1/2 in. X 1 3/8 in. type A plated flat washer
D
D01–2481
Rear hitch cross channel
E
D01–xxxx
For leg stand, refer to
Guidelines for Supporting the Dryer with
Pneg-1891 Portable Dryers
21
Advertising