Grain Systems PNEG-1891 User Manual
Page 35
Advertising
Chapter 6: Installing the Wet Bin
1. At each end of the dryer, attach the end plate connectors to the corners of the dryer wet bin, (see
).
2. Raise the dryer wet grain bin sides (B) and secure them to the end plate connectors (A), (see
).
NOTE: Do not connect the side of the dryer wet bin that is adjacent to the load auger motor. Leave
this side open to allow for easy access when attaching the belt guard body.
Figure 6-4 The end plate connectors of the dryer wet bin
A
End plate connector
Pneg-1891 Portable Dryers
35
Advertising