Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1849 - Manual (Page 11)

PNEG-1849 30"-36" Bucket Elevator Platform and Ladder “X” Series 11
5. Ladder Assembly
Chapter 5: Ladder Assembly
The ladder sections are to be mounted directly to the trunking sections. Quantities and section lengths
may vary depending on overall height of system. If you have a non-standard height system, refer to
supported bucket height reference chart
below for the correct ladder package for the system.
Supported Bucket Height Reference Chart
NOTE: Ladders are of a modular design for ease of modification in the field. These illustrations are only
to be used as a “general” guide to installation layout. The exact assembly may vary due to the
unique nature of each bucket elevator.
See Figures 5A-5G on Pages 12-18 to help determine if the ladders should be started on the up-leg or
down-leg of the elevator and also aid in the ladder order and rest platform locations for bucket elevators
with heights from 20' through 180'.
Part # Supported Bucket Height (Ft.) Part # Supported Bucket Height (Ft.)
1636XRLAD20 0-29 1636XWLAD20 0-29
1636XRLAD30 30-39 1636XWLAD30 30-39
1636XRLAD40 40-49 1636XWLAD40 40-49
1636XRLAD50 50-59 1636XWLAD50 50-59
1636XRLAD60 60-69 1636XWLAD60 60-69
1636XRLAD70 70-79 1636XWLAD70 70-79
1636XRLAD80 80-89 1636XWLAD80 80-89
1636XRLAD90 90-99 1636XWLAD90 90-99
1636XRLAD100 100-109 1636XWLAD100 100-109
1636XRLAD110 110-119 1636XWLAD110 110-119
1636XRLAD120 120-129 1636XWLAD120 120-129
1636XRLAD130 130-139 1636XWLAD130 130-139
1636XRLAD140 140-149 1636XWLAD140 140-149
1636XRLAD150 150-159 1636XWLAD150 150-159
1636XRLAD160 160-169 1636XWLAD160 160-169
1636XRLAD170 170-179 1636XWLAD170 170-179
1636XRLAD180 180-189 1636XWLAD180 180-189
1636XRLAD190 190-199 1636XWLAD190 190-199
1636XRLAD200 200-209 1636XWLAD200 200-209
CAUTION
Due to O.H.S.A. standards, it is required that a rest platform be installed every 30'.