Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1849 - Manual (Page 20)

20 PNEG-1849 30"-36" Bucket Elevator Platform and Ladder “X” Series
6. Tie Angles, Ladders and Safety Cages
Chapter 6: Tie Angles, Ladders and Safety Cages
Attach Tie Angle to Boot Trunking
1. On the NON LADDER SIDE, attach tie angle to the trunking using 1/2" x 1" bolts. (See Figure 6A
and Figure 6B.)
a. For 30" Boot Tie Angle: With lip of tie angle up and outward, align tie angle so that it extends
beyond the trunking at each end. (See Figure 6A.) .
Figure 6A 30" Boot Tie Angle
b. For 36" Boot Tie Angle: With lip of tie angle up and outward, align both edges of tie angle to
edges of trunking. Note the tie angle will not extend beyond the trunking. (See Figure 6B.)
Figure 6B 36" Boot Tie Angle