Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1849 - Manual (Page 34)

34 PNEG-1849 30"-36" Bucket Elevator Platform and Ladder “X” Series
7. Rest Platform
Chapter 7: Rest Platform
Rest Platform Tie Angles to Bucket Elevators
1. Install rest platform tie angles to the lower trunking on both the ladder side and non-ladder side of the
trunking. Use 1/2" x 1" bolts through the bolt holes indicated for the bucket elevator size being
installed.
(See Figure 7A.)
NOTE: Bolt hole starting location on left side of tie angle is marked with the bucket size.
Figure 7A Tie Angle with Etched Numbers
Figure 7B 30" Rest Platform Tie Angle Bolt Locations - Ladder Side