Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1849 - Manual (Page 44)

44 PNEG-1849 30"-36" Bucket Elevator Platform and Ladder “X” Series
8. 30"-36" Head Platform Right Hand Drive
Chapter 8: 30"-36" Head Platform Right Hand Drive
To facilitate quick and easy assembly, numerous parts are pre-assembled prior to shipping.
Considerable time is dedicated at the beginning of this manual to the proper orientation of channels and
decks. This is because the orientation of these elements is essential to the proper construction of the
head platform.
1. There are many ways to get the orientation wrong and only one way to get it right.
2. Proper orientation of the channels and decks is essential proper assembly.
3. Proper construction of the head platform can only be completed if the initial orientation of the
channels is done correctly.
Therefore, we strongly advise you take time to confirm that the orientation of these early elements is
correct before you begin to assemble the decking on to the channels.
To facilitate proper connections, major connecting holes are etched with alpha-numeric codes.
One side is labeled X1 through X7, this side is referred to as the “X” side. The opposite side is labeled
with Y1 through Y7 and is referred to as the “Y” side.