Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1849 - Manual (Page 86)

86 PNEG-1849 30"-36" Bucket Elevator Platform and Ladder “X” Series
11. Install Hatch
Chapter 11: Install Hatch
1. Attach hatch hinge (HP1624HH) to the hatch deck door (HP1624HDD). Orient hinge so that it opens
the desired direction. (See Figure 11A.) Fasten using 3/8" x 1" carriage bolts hardware.
Figure 11A
2. Install hatch support (HP1624HS) to the bottom of the hatch door using 3/8" x 1" carriage bolts
and nuts. (See Figure 11B.)
3. Fasten peak cap handle (PR-331) to the bottom of the hatch door using 3/8" x 1" carriage bolts
and nuts.
Figure 11B