Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1849 - Manual (Page 61)

9. 30"-36" Head Platform Left Hand Drive
PNEG-1849 30"-36" Bucket Elevator Platform and Ladder “X” Series 61
Attach Cross Deck Support Channels to Lower Head
Three (3) cross deck support channels support the platform. Two (2) of the channels are attached to
brackets on the lower head section and the third channel is attached to the decking itself but is not
attached directly to the lower head. This third channel will be attached after the deck is assembled.
(See Figure 9A.)
Figure 9A Left Platform Overview
NOTE: The difference between left and right. The only difference is the channel orientation as they attach
to the lower head brackets. This makes you swap Deck A with the positions of Deck C and Deck F.