Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1849 - Manual (Page 90)

12. 4 x 5 Distributor Platform (Optional)
90 PNEG-1849 30"-36" Bucket Elevator Platform and Ladder “X” Series
Assemble Supports
Support Channel, Cross Support and Knee Brace Assembly
1. Attach brace channels to the sides of the support channels using four (4) 1/2" x 1" bolts and nuts.
Angle the knee braces across the bottom sides of the brace channels and attach using four (4)
1/2" x 1" bolts and nuts.
2. Assemble the cross supports to the bottom side of the support channels using the end and middle
sets of holes on the support channels using four (4) 1/2" x 1" bolts and nuts. (See Figure 12B.)
3. Assemble the external platform support (DSP1648EPS) to the end of the three (3) cross supports
using six (6) 1/2" x 1" bolts and nuts. (See Figure 12C on Page 91.)
Figure 12B Distributor Platform Cross Support