Hopper section assembly, Chapter 7 hopper section assembly, Hopper section assembly 36' diameter hopper tanks – Grain Systems Tanks PNEG-805 User Manual
Page 25
Advertising
![background image](/manuals/277711/25/background.png)
PNEG-805 36' Diameter 40°/45° NCHT Commercial Hopper Tanks
25
7. Hopper Section Assembly
Hopper Section Assembly 36' Diameter Hopper Tanks
Use a transit and surveyors rod to locate high and low areas in the concrete, before placing the support
columns on the anchor bolts. To assure level alignment, use the proper supplied shim (or) shims between
the concrete and base plate. After leveling, place the support columns over the anchor bolts, on the shims
and loosely fasten with nuts and washers (not supplied).
Figure 7A Column Shim Plate Detail (Use when necessary.)
Ref #
Part #
Description
A
CHT-1425
Shim Plate
Advertising