Install rack and pinion roller gate – Grain Systems Tanks PNEG-805 User Manual
Page 32
Advertising
7. Hopper Section Assembly
32
PNEG-805 36' Diameter 40°/45° NCHT Commercial Hopper Tanks
Install Rack and Pinion Roller Gate
If a rack and pinion gate is purchased, install as shown in
, using 5/16" x 3/4" hardware.
NOTE: Top extension plate may have to be loosened prior to discharge collar connection.
Figure 7J Hopper Discharge Collar to Roller Gate
Ref #
Description
A
Hopper Panels
B
Discharge Collar Weldment
C
Roller Gate Assembly
D
5-1/2" Height
Advertising