Grain Systems Tanks PNEG-805 - Manual (Page 65)

17. Aeration
PNEG-805 36' Diameter 40°/45° NCHT Commercial Hopper Tanks 65
Aeration Package (Optional) (Continued)
Figure 17C
Ref # Description
A Weld Detail
B 18" Angle Ring (F-895) (Bolt or weld to elbow tube after tube installation.)
C Weld Reinforcement Sleeve to Sidewall
D Two (2) Layers of Sidewall
E Weld Reinforcement Sleeve to Sidewall, Weld or Screw Elbow to Sleeve
F Screw or Weld Elbow to Aeration Tube Coupler
G Screw or Weld to Aeration Tube
H Bolt or Weld to Hopper Sheet
I Corrugated Angle Hold-Down Attachment Detail
J Weld to Hopper or Bolt with 1/2" Bolts (Field drill and replace all seam bolts.)
K Screw or Weld to Tube