Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1434 - Manual (Page 11)

3. Safety Decals
PNEG-1434 6", 8" and 10" Roof Augers 11
Check components shown below to ensure that the safety decals are in place and in good condition.
If a decal cannot be easily read for any reason or has been painted over, replace it immediately. Contact
your dealer or the manufacturer to order a replacement decal free of charge.
Contact:
The GSI Group
1004 E. Illinois Street
Assumption, IL. 62510
Phone: 217-226-4421
1
DC-994 SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994
CAUTION
FAILURE TO PROPERLY SELECT,
INSTALL OR MAINTAIN AN AUGER, ITS
DRIVE OR OTHER COMPONENTS CAN
RESULT IN DANGEROUS OPERATION.
THIS EQUIPMENT IF IMPROPERLY
SELECTED, INSTALLED OR
MAINTAINED MAY FAIL AND COULD
RESULT IN SERIOUS INJURY OR
PROPERTY DAMAGE.
CHECK PRODUCT LITERATURE AND
EQUIPMENT MANUFACTURER’S
LITERATURE OR CALL THE FACTORY
FOR FURTHER INFORMATION.
DC-1234
SHEAR POINT
Keep clear of rotating auger and
moving parts.
Do not remove or modify guards.
Disconnect and lock out power
before servicing.
Failure to do so will result in
serious INJURY or DEATH.
DC-1381
DC-1379 DC-1234
DC-1381 DC-994 2
6 4
(Decal located on both
sides of tube.)