Installing the auger stands (continued) – Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1434 User Manual
Page 24
Advertising
24 PNEG-1434 6", 8" and 10" Roof Augers
4. Assembly
Installing the Auger Stands (Continued)
B. Install the shortest stand as close to the intake hopper as possible. Positioning the stand as close
as possible to the hopper will help to distribute the hoppers weight.
Figure 4T
C. Install the remaining stand in the center of the tube. Placing the stand in the center of the tube will
help minimize vibration in the system when the auger is running.
Figure 4U
Do not place roof auger support stands directly on roof panel surface.
Attach stands to angle iron that spans completely across the roof panel ribs.
Advertising