Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1434 - Manual (Page 23)

4. Assembly
PNEG-1434 6", 8" and 10" Roof Augers 23
Installing the Spout
A. Align spout with holes on motor mount tube.
B. Attach spout using 5/16"-18 x 1-1/2" hex bolt and lock nut. (See Figure 4R.)
Figure 4R
Installing the Auger Stands
A. Attach the tallest stand on the motor mount side of the connecting flange. It is necessary to place the
stand on the motor mount side of the flange to help support the weight of the motor. (See Figure 4S.)
Figure 4S