Attaching the a-frame to the eave bracket, Chapter 7: roof assembly – Grain Systems Tanks PNEG-4135A User Manual
Page 130
A
A-frame rafter assembly
C
1/2 x 1-3/4 in. flange bolt (S-10252)
B
Center collar (CTR-0347)
D
1/2 in. flange nut (S-10253)
Attaching the A-Frame to the Eave Bracket
Assemble the lower portion of the A-frame rafters to the sidewalls.
1. Install flange bolts (B) and flange nuts (D), securing one side on the A-frame assembly.
2. Repeat this procedure for the other side of the A-frame.
3. Tighten to the recommended torque specifications. See
Bolt Torque Specifications, page 26
.
Figure 7-41 Attaching the rafter to the eave bracket
A
A-frame rafter assembly
D
1/2 in. flange nut (S-10253)
B
1/2 x 1-3/4 in. flange bolt (S-10252)
E
Hole for alignment tool
C
Eave bracket (CTR-0550)
After You Finish
Continue to the next A-frame installation until all of the A-frame rafter assemblies are installed. See
Temperature Cable Brackets and A-Frame Assemblies, page 83
.
130
Pneg-4135A 135 Ft Diameter 40-Series Bin