Chapter 6: stiffeners – Grain Systems Tanks PNEG-4135A User Manual
Page 67
Advertising
Close-Punch Connection for a Base Stiffener (2+2 Ga – 8 Ga) to a
Base Boot
Reference the following information for a close-punch connection for a base stiffener (CTS-2119XX) to a
base boot (CTS-2110XX).
Figure 6-25 Base Stiffener (2+2 Ga – 8 Ga) to a Base Boot Close-Punch Connection
A
Close-punch base stiffener (CTS-2119XX)
B
Close-punch base Boot (CTS-2110XX)
C
3/8 x 1 Bolt (S-7485)
D
3/8 Nut (S-9426)
E
Completed assembly
NOTE: Two-post stiffeners shown. The bolt pattern will
vary for three-post. Only place bolts where
holes in the stiffeners align with holes in the
sidewall sheet.
Pneg-4135A 135 Ft Diameter 40-Series Bin
67
Advertising