Grain Systems Tanks PNEG-4135A - Manual (Page 49)

6
Stiffeners
Topics Covered in this Chapter
▪ Stiffener Part Number Description
▪ Color Codes for Stiffener Gauge Identification
▪ Outside Stiffened Laminated Stiffener to Sidewall (10 Gauge Laminated and Thicker Only)
▪ Standard Stiffeners
▪ Top Stiffeners
▪ Stiffeners Splice
▪ Base Stiffeners
▪ Base Boots
▪ Close-Punch Connection for a One-Ring Top Stiffener (16 Ga) and a Two-Ring Stiffener (16
Ga)
▪ Two-Ring Top Stiffener to a Two-Ring Stiffener (15–16 Ga) Connection
▪ Close-Punch Connection for a Two-Ring Top Stiffener to a Two-Ring Stiffener (16 Ga)
▪ Two-Ring Stiffener (15-16 Ga) to a Two-Ring Stiffener (15–16 Ga) Connection
▪ Close-Punch Connection for a Two-Ring Stiffener (16 Ga) to a Two-Ring Stiffener (16 Ga)
▪ Two-Ring Stiffener (0–14 Ga) to a Two-Ring Stiffener (0–14 Ga) Connection
▪ Close-Punch Connection for a Two-Ring Stiffener (0–14 Ga) to a Two-Ring Stiffener (0–14
Ga)
▪ Two-Ring Stiffener (0–14 Ga) to a Close-Punch Base Stiffener (2–8 Ga) Connection
▪ Close-Punch Connection for a Two-Ring Stiffener (0–14 Ga) to a Base Stiffener (2–8 Ga)
▪ Two-Ring Stiffener (0–14 Ga) to a Base Stiffener (10–16 Ga) Connection
▪ Two-Ring Stiffener (2–14 Ga) to a Base Stiffener (10–16 Ga) Connection
▪ Two-Ring Stiffener (15–16 Ga) to a Base Stiffener (10–16 Ga) Connection
▪ Close-Punch Connection for a Two-Ring Stiffener (16 Ga) to a Base Stiffener (10–16 Ga)
▪ Close-Punch Two-Ring Stiffener (2–14 Ga) to a Laminated Stiffener (2 Ga) with an Insert (10–
14 Ga)
▪ Close-Punch Laminated Stiffeners (2 Ga) with Inserts (10–14 Ga)
▪ Close-Punch Laminated Stiffener (2 Ga) with an Insert (10–14 Ga) to a Laminated Base Stiff-
ener (2–5 Ga) with a Base Insert (2–14 Ga)
▪ Base Stiffener (10–16 Ga) to a Base Boot Connection
▪ Close-Punch Connection for a Base Stiffener (10–16 Ga) to a Base Boot
▪ Close-Punch Connection for a Base Stiffener (2+2 Ga – 8 Ga) to a Base Boot
▪ Close-Punch Laminated Base Stiffener (2 Ga) with Insert (2+14 to 2+10 Ga) to a Base Boot
▪ Close-Punch Standard Stiffener to a 12–Bolt Pattern Laminated Stiffener with Insert
▪ 12–Bolt Pattern Close-Punch Laminated Stiffeners with Insert
▪ Close-Punch 12–Bolt Pattern Laminated Stiffener to Laminated Base Stiffener with an Inserts
to a Base Boot
▪ Close-Punch 12–Bolt Pattern Laminated Stiffener to Laminated Base Stiffener with an Inserts
to a Base Boot
Pneg-4135A 135 Ft Diameter 40-Series Bin 49