Vision touch screen display, The setup screen – Grain Systems PNEG-1459 User Manual
Page 14
14
PNEG-1459 L Series Operators
The plenum temperature setpoint range
is 80
o
F - 250
o
F, and the current tempera-
ture setpoint for each plenum is dis-
played next to the corresponding
plenum button.
The grain temperature setpoint range is
80
o
F - 150
o
F, and the current tempera-
ture setpoint for the grain temperature is
displayed next to the Grain Temp.
button.
Modifying a temperature setpoint is
much like setting a timer described on
the previous page. Touch the desired
button of the setpoint you wish to
change. The Modify Temperature
Setpoint screen will appear. Enter the
desired temperature using the displayed
number pad then touch the Accept
button. Touching the Exit button at the
bottom of the Select Temperature Setpoint to Modify screen will return you to the Operators Screen.
THE SETUP SCREEN
The Setup Screen will allow you to setup other parameters of your dryer. To use the Setup Screen touch the
but-
ton. The Select Hardware Setup Parameter To Modify screen will now be displayed. As you can see there several different
parameters that can be modified on this screen:
1.) Drying Mode: Touching the Drying Mode button will display the Select Drying Mode window. Touch the desired drying
mode button (Continuous Flow or Staged Batch). A check mark is displayed next to the currently selected drying mode.
2.) Set Time/Date: Touching the Set
Time/Date button will display the Set
Time/Date window. Use the up and
down buttons to change each of the
parameters for date and time. Touch
Accept / Exit to save settings and return
to the Select Hardware Parameter To
Modify screen.
3.) Dryer Model: Touching the Dryer
Model button will display the Dryer
Hardware Setup window. In order for
your dryer operate properly the follow-
ing items must be entered correctly:
a) Number Fan/Heaters
b) Load System
c) Dryer Length (ft.)
d) Number Modules
e) Fuel
Touch the select button until a check
mark appears next to the parameter
corresponding to your dryer model.
4.) M/C Setup: The M/C Setup operations are described in greater detail in the dryer operation section of this manual.
VISION TOUCH SCREEN DISPLAY