Grain Systems PNEG-1459 - Manual (Page 7)

7 PNEG-1459 L Series Operators
ALL MODELS:
DRYER BODY EXPANDS FROM
8’ TO 11’ WITH HEAT RECLAIMER *
NOTE 1:
2’ LEG HEIGHT IS STANDARD.
OTHER HEIGHTS ARE AVAILABLE.
Fig. 1-1 Centrifugal dryer dimensions
Model
3020L
4026L
6034L
7534L
1038L ‘A'
9'-6"
9'-6"
10'-11"
10'-11"
10'-11" ‘B'
20'-0"
26'-0"
34'-0"
34'-0"
38'-0" ‘C'
33'-3"
39'-3"
48'-8"
48'-8"
52'-8" ‘D'
37'-0"
43'-0"
52'-0"
52'-0"
56'-0"
Leg Pairs Required
Body Fan-Heater
3
2
4 2
5 2
5 2
5 2
Models 3020L, 4026L, 6034L,
7534L, and 1038L for Dry & Cool:
Designed for drying in the top 2/3 of
the grain column and vacuum cooling
in the lower 1/3 of the grain column,
thus reclaiming the heat in the grain
to preheat the drying air.
Field Conversion: Converter pack-
ages are available to permit conver-
sion from Full Heat to Dry & Cool
(pressure or vacuum cooling).
GRAIN COLUMNS: Two 14" galva-
nized steel grain columns. Solid col-
umn dividers every two feet. Grain
movement through columns is con-
trolled by advanced electronic vari-
able speed metering roll drive control.
AUGERS: Automatically controlled
top leveling auger. Bottom auger
unloads grain discharged from meter-
ing rolls. Heavy-duty construction.
MOISTURE CONTROL: Automatic
moisture control system uses control
computer to modulate meter roll
speed.
AUTOMATIC CONTROL: Automatic
control of loading, drying, cooling,
and discharge functions. Full safety
control system; automatic shutdown
on wet grain outage, grain Hi-Limit,
and discharge safety shutoff.
Section1: SPECIFICA-
TIONS
SEE
NOTE 1
SPECIFICATIONS