Grain Systems PNEG-1459 - Manual (Page 5)

5 PNEG-1459 L Series Operators
The emergency stop switch is located on the upper control box door. Pushing the emergency stop switch will interrupt the control
power and stop all dryer functions.
WARNING: Pushing the emergency stop switch does not
interrupt the main power to the upper control box panel.
The symbol shown is used to call your attention to instructions concerning your personal safety. Watch for this symbol; it points
out important safety precautions. It means "ATTENTION", "WARNING", "CAUTION", and "DANGER". Read the message
and be cautious to the possibility of personal injury or death.
SAFETY ALERT SYMBOL
The GSI Group, Inc. recommends contacting your local power company, and having a representative survey your installation so the
wiring is compatible with their system, and adequate power is supplied to your unit. Safety decals should be read and understood by
all people in the grain handling area.
If a decal is damaged or is missing contact:
The GSI Group, Inc.
1004 E. Illinois St.
Assumption, IL 62510
217-226-4421
A free replacement will be sent to you.
SAFETY DECALS
Decal: DC-1224
Decal DC-1224 is located in two places on
the fan/heater control box. One on the lid and one
on the front of the fan heater control box. An-
other location for this decal is inside the upper
control box for the dryer.
Decal: DC-889
Decal DC-889 has two locations. One inside the fan/heater
control box and another on the dryer upper control box door
next to the main power disconnect.
WARNING! BE ALERT!
Personnel operating or working around electric fans should read this manual. This manual must be delivered
with the equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the
equipment.
EMERGENCY STOP SWITCH
SAFETY