Grain Systems PNEG-1459 - Manual (Page 16)

16 PNEG-1459 L Series Operators
VIEWING THE OWNERS MANUALS ON THE DISPLAY SCREEN
The operators and parts manuals can be viewed on the display screen. To view a manual touch the button.
When the View Selection Window appears touch the Owners Manual button. A new display will appear called an explorer
window (shown below). The explorer window will show the manuals that are stored in the computer memory. In this case they
are PNEG-1403 (2 Fan Vision Parts), and PNEG-1456 (1 & 2
Fan Vision Operators). To select a manual to view you must
“double tap” the desired manual icon. Much like double
clicking a mouse on your computer. Once selected it may take
a few seconds for the manual to be displayed. Once the manual
is displayed use the scroll bars on the right to scroll through the
pages of the manual.
To exit the manual
and return to the
Operation Screen
touch the X button in
the upper right corner
of the screen.
VIEWING THE DRYER SHUTDOWN HISTORY
The dryer will keep track of all safety shutdown warnings. To view the Shutdown History touch the button.
When the View Selection Window appears touch the History button. A new window called Shutdown History will appear. A list
of all shutdown warnings are listed.
This list can be sorted by:
1.) Warning
2.) Date/Time
3.) Node
by touching any of the three sort by
buttons.
The whole list can be copied to a USB
flash drive and transferred to a personal
computer as a text file by touching the
Copy To USB Flash Card button.
The list can also be cleared to start a
new list by touching the Clear History
button.
To return to the Operators Screen touch
the Exit button.
VISION TOUCH SCREEN DISPLAY
10.) Meter Roll Reverse: Touch the Meter Roll Reverse button to reverse the metering rolls. Reversing the metering rolls aids
in cleaning out the fine material that builds up over the course of the drying season. Just touching this button will toggle
between normal meter roll operation and reversed meter roll operation.