Asus CUR-DLSR - Manual (Page 101)

ASUS CUR-DLSR User’s Manual 101
5. Motherboard Driver Installation
5. Driver Installation
SCO UnixW
are
6. SCO UnixWare Server
I. LSI SCSI Driver Installation
A. Building the SCO UnixWare C8XX BTLD Diskette
To create a C8XX BTLD diskette to use with UnixWare 2.1.X or UnixWare 7, copy
the raw dd image file onto a 1.44 Mbytes floppy diskette. This process is dependent
upon the operating system that you are using to create this diskette. See the instruc-
tions below for UNIX System and DOS System Users. After the driver diskette been
created, labeled as “PCI SCSI SCO UnixWare driver”.
For UNIX System Users:
Follow these steps to create the BTLD diskette:
1. Insert a 3.5" diskette into the floppy diskette drive.
2. At the UNIX prompt, type: [dd if=/<path>/unixware.dd of=/dev/rfd0]. The
<path> is where the dd image is located. For UnixWare 2.1.X, the dd image
file is located here:
/SDMS/DRIVERS/UNIXES/UNIXWARE/UW21X/UNIXWARE.DD
For UnixWare 7, the dd image file is located here:
/SDMS/DRIVERS/UNIXES/UNIXWARE/UW7/UNIXWARE.DD
For DOS System Users:
Under this section, DOS system users have two choices.
1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes floppy dis-
kette. For UnixWare 2.1.X, this dd image is located at:
\SDMS\DRIVERS\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD
For UnixWare 7, this dd image is located at:
\SDMS\DRIVERS\UNIXES\UNIXWARE\UW7\UNIXWARE.DD
RAWRITE3.COM, which is a public domain utility, is available on this CD-
ROM at this location:
\SDMS\DRIVERS\UNIXES\RAWRITE3.COM
Instructions for using this utility are included in its accompanying RaWrite file
or as a Microsoft Word document located at:
\SDMS\DRIVERS\UNIXES\RAWRITE3.DOC
2. The other DOS alternative is to use the self-extracting image file appropriate
for your version of UnixWare. These are located under:
\SDMS\DISKIMAG\UW21X.EXE (-or-) \SDMS\DISKIMAG\UW7.EXE