Asus CUR-DLSR - Manual (Page 84)

84 ASUS CUR-DLSR User’s Manual
5. Motherboard Driver Installation
5. Driver Installation
Windows 2000
A. Preparing Intel 82559 Lan Driver Diskette
If you need to use a floppy disk to install the onboard Intel 82559 network adapter
drivers, use the MAKEDISK.BAT utility located in the \LAN\MAKEDISK direc-
tory on ASUS Driver Support CD.
MAKEDISK [operating system] [destination]
where [operating system] is the OS for which you are creating the diskette, and
[destination] is the drive letter and path (such as A:). If no destination is specified,
the A: drive will be used. The possible [operating system] options are:
NT = Microsoft Windows NT
2K = Microsoft Windows* 2000
NW = Novell NetWare servers and clients
Make sure you have a 1.44 MB formatted, non-bootable diskette in the floppy drive
when using this utility. Alternately, you can use the MAKEW2K.BAT files (located
in the \LAN root directory on this CD) to simplify this process:
MAKEW2K.BAT — Creates a drivers disk for Windows 2000.
B. Update Driver on an Existing System Installation
1. Boot Windows 2000 system and log on as Administrator.
2. Click on the Start button. Select Settings—>Control Panel.
3. Double-click the System icon in the Control Panel.
4. Select the Hardware tab. Click on Device Manager…. Button.
5. Click the Network Adapters. And highlight “Intel 8255x-based PCI Ether-
net Adapter [10/100]”. Click right-button on the mouse. Select Properties.
6. Select the Driver tab. Click on Update Drivers.. Button.