Asus CUR-DLSR - Manual (Page 93)

ASUS CUR-DLSR User’s Manual 93
5. Motherboard Driver Installation
5. Driver Installation
Sun Solaris
4. SUN Solaris X86 Server
I. LSI SCSI Driver Installation
A. Building the SYMHISL Driver Update Diskette
To create a SYMHISL diskette for Solaris installations, copy the raw symitu.dd
image file onto a 1.44 Mbytes floppy diskette. This process is dependent upon the
operating system that you are using to create this diskette. See the instructions be-
low for UNIX System and DOS System Users.
For UNIX System Users:
Follow these steps to create the SYMHISL Driver Update diskette:
1. Insert a 3.5" diskette into the floppy diskette drive.
2. At the UNIX prompt, type:
#volcheck -v
#dd if=/<path>/symitu.dd of=/vol/dev/aliases/floppy0 bs=36k
#eject floppy
The <path> is where the dd image is located. On this CD-ROM, the dd image file is
located here:
/SDMS/DRIVERS/UNIXES/SOLARIS/SOLARIS/SYMITU.DD
For DOS System Users:
Under this section, DOS system users have two choices.
1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes floppy dis-
kette. This dd image is located at:
\SDMS\DRIVERS\UNIXES\SOLARIS\SOLARIS\SYMITU.DD
RAWRITE3.COM, which is a public domain utility, is available on this CD-
ROM at this location: \SDMS\DRIVERS\UNIXES\RAWRITE3.COM
Instructions for using this utility are included in its accompanying RaWrite file
or as a Microsoft Word document located at:
\SDMS\DRIVERS\UNIXES\RAWRITE3.DOC
2. The other DOS alternative is to use the self-extracting image file that is lo-
cated at: \SDMS\DISKIMAG\SOLARIS.EXE
B. New System Installation
These instructions provide details to install the SDMS symhisl driver using the
SYMHISL Update diskette created above during installation of the operating sys-
tem using the SYM53C896 or SYM53C1010 controller. To use the driver on the
SYMHISL Driver Update diskette to install Solaris X86 (Intel Platform Edition) on
a machine, follow the next steps.