Hardware setup – Asus CUR-DLSR User Manual
Page 32
32
3. HARDWARE SETUP
ASUS CUR-DLSR User’s Manual
3. H/W SETUP
Connectors
5) IDE/SCSI Activity LED (2-pin IDELED) (also in Panel Connectors)
This connector supplies power to the cabinet’s activity LED. Read and write
activity by devices connected to the Primary/Secondary IDE and SCSI connectors
cause the LED to light up.
6) Two 68-pin Ultra160 SCSI Connectors (SCSI-A, SCSI-B)
This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the
two channels. Each channel can support a maximum of 15 devices as specified
by Ultra160 standards.
CUR-DLSR
CUR-DLSR IDE Activity LED
IDELED
+ -
*Same as the “HDD Access
LED” in the panel connectors
CUR-DLSR
CUR-DLSR Onboard SCSI Connectors
35
68
34
1
35
68
34
1
SCSI-A (Internal)
68-Pin Ultra160/Ultra2-Wide SCSI Connector
SCSI-B (External)
68-Pin Ultra160/
Ultra2-Wide SCSI Connector