Asus RS100-E8-PI2 - Manual (Page 100)

Chapter 5: BIOS setup 5-30
5.6 Boot menu
The items in Boot menu allows you to change the options on how the system will boot.
Setup Prompt Timeout [xx]
This item allows you to adjust the number of seconds to wait for setup activation key. Use the
<+> and <-> keys to specify the values.
Bootup NumLock State [On]
Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]
Full Screen Logo [Enabled]
Allows you to enable or disable the full screen logo display feature. Configuration options:
[Disabled] [Enabled] .
N u m b e r o f s e c o n d s
t o w a i t f o r s e t u p
activation key.
6 5 5 3 5 ( 0 x F F F F ) m e a n s
indefinite waiting.
Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]
Full Screen Logo [Enabled]
CSM16 Module Version 07.69
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
INT19 Trap Response [Immediate]
Boot Device Seeking [Endless PXE]
Boot Option Priorities
Boot Option #1 [P0: DVD ]
Boot Option #2 [P4: Harddisk 2.50G]
Boot Option #3 [Windows Boot Man..]
CD/DVD ROM Drive BBS Priorities
Network Device BBS Priorities
Hard Drive BBS Priorities
CSM parameters
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Event Logs Boot Monitor Security Tool Exit Boot
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
GateA20 Active [Upon Request]
This item is useful when any RT code above 1MB is executed. When set to [Upon Request],
the GA20 can be disabled using BIOS services. When set to [Always], disabling of GA20 is
not allowed. Configuration options: [Upon Request] [Always]
Option ROM Messages [Force BIOS]
Allows you to set the display mode for Option ROM. Configuration options: [Force BIOS]
[Keep Current]